Mickey7@lemmy.world to Lemmy Shitpost@lemmy.world · 15 days agoTHIS is an inventive idealemmy.worldimagemessage-square27fedilinkarrow-up1481arrow-down18
arrow-up1473arrow-down1imageTHIS is an inventive idealemmy.worldMickey7@lemmy.world to Lemmy Shitpost@lemmy.world · 15 days agomessage-square27fedilink
minus-squareLastYearsIrritant@sopuli.xyzlinkfedilinkEnglisharrow-up18·15 days agohttps://safetyrailsource.com/products/nextgen-hitchclip With just a little pre-planning when the weather is ok, you can install some brackets or fall harness mounts under the shingles. Solar panel mounts would also work. There’s plenty of things designed to mount to the roof while still maintaining water proofing.
minus-squarebase10@lemmy.dbzer0.comlinkfedilinkarrow-up1·14 days agoMost things that mount to the roof just drill straight though everything and then add waterproofing sealant at the top of the hole/fastener anyway
minus-squareLastYearsIrritant@sopuli.xyzlinkfedilinkEnglisharrow-up1·14 days agoNo, most things slide under a shingle so the water never touches the fasteners. Some things screw right through with sealant on top, but that’s not the best way to do it, cause sealant will break down over time.
minus-squarebase10@lemmy.dbzer0.comlinkfedilinkarrow-up1·13 days agoI agree with you that it is definitely not the best way, by far. However, of all the things I have seen installed on a roof, almost all of them have been installed this way. I think it also depends where you are and what kind of roof you have.
https://safetyrailsource.com/products/nextgen-hitchclip
With just a little pre-planning when the weather is ok, you can install some brackets or fall harness mounts under the shingles.
Solar panel mounts would also work. There’s plenty of things designed to mount to the roof while still maintaining water proofing.
Most things that mount to the roof just drill straight though everything and then add waterproofing sealant at the top of the hole/fastener anyway
No, most things slide under a shingle so the water never touches the fasteners.
Some things screw right through with sealant on top, but that’s not the best way to do it, cause sealant will break down over time.
I agree with you that it is definitely not the best way, by far. However, of all the things I have seen installed on a roof, almost all of them have been installed this way. I think it also depends where you are and what kind of roof you have.